Home > Knowledge > Content
Operating LED electronic display precautions
- Jan 11, 2018 -

At present, with the development of China's LED display industry continues to increase in the major cities of the streets ledger large-screen display slowly more and more people spending level is also growing, LED lighting has been gradually applied to the daily life of the family, LED Electronic display not only enhances the image of the city, LED also enrich people's cultural life, in this regard can reflect the development of LED industry is so fast, while we enjoy the economic benefits of LED electronic screen at the same time, some with LED electronic display Screen business not fully understand the LED electronic screen operation and the use of precautions to lead to shorten the life of LED electronic display Here, Aisi Wei senior professionals to explain to us the LED electronic display operation and use of precautions, To ensure that the LED display system is safe, normal operation!

    First, switch LED electronic display Note:

    1 switch order:

    Open the screen: the first boot, open the screen.

    Off screen: first off the screen, after shutdown

    (The first off the computer does not turn off the display, will cause the screen to appear highlighted, led burn the lamp, the consequences.)

    2, switching time interval should be greater than 5 minutes.

    3, the computer into the engineering control software, before opening power.

    4, to avoid opening the screen in all white state, because the impact current system at this time the largest.

    5, to avoid running out of control in the open state, because the impact current system at this time the largest.

    A computer did not enter the control software and other programs;

    B computer is not powered;

    C Control section power is not turned on.

    6. Ambient temperature is too high or poor cooling conditions, led lighting should be careful not to open a long time.

    7. Part of the electronic display body line is very bright, should pay attention to promptly turn off the screen, in this state should not be open for a long time.

    8. Often the display of the power switch tripping should promptly check the screen or replace the power switch.

    9. Regularly check the firmness of the junction. If there is loose phenomenon, pay attention to timely adjustment, re-reinforcement or update hanger.

    10. According to the large screen display screen, the control part of the environment, to avoid insect bites, when necessary, place the rat poison. led display

    Second, the control part of the change, change precautions

    1. Computer, control part of the power cord zero, the fire can not reverse, should be strictly according to the original position plug. If peripherals, after the connection is completed, should test the case is charged.

    2. Mobile computers and other control equipment, the first check before connecting power lines, control panel loose phenomenon.

    3. Can not arbitrarily change the communication line, flat connection line position, length.

    4. If found short-circuit, trip, burn, smoke and other abnormalities after the move, should not be repeatedly energized test, should be timely to find the problem.

          Three software operation precautions

    1 software backup: WIN2003, WINXP, applications, software installers, databases, etc., it is recommended to use the "one-click restore" software, easy to operate.

    2 master the installation method, the original data recovery, backup.

    3 master control parameter settings, basic data preset changes

    4 proficient use of procedures, operation and editing.

    5 regularly check the virus, delete irrelevant data

    6. Non-full-time staff, do not operate the software system.

Related Products